MORTARS

A factory blend of Portland cement, fine sand and special chemical additives
which produce an excellent dry-set mortar for floor tile installations of low
absorption tiles (less than 7%).
Applicable ANSI Standards: A108.5, A108.1B, A118.1
+Download Data Sheet
+Download MSDS

Offers high flexibility and bond strength for a wide variety of floor and wall
tile installations.Excellent for setting large format tile or stone, PRO M-LITE 929
will not sag or slip on walls and offers non-slump performance for floor installations.
PRO M-LITE 929 is 40% lighter than traditional mortars, providing excellent handling
characteristics. A 30 lb. (13.6 kg) bag covers the same area as a 50 lb. (22.7 kg) bag
of traditional mortar. Formulated with recycled material – contributes to LEED certification.
Applicable ANSI Standards: A118.4 and A118.11
+Download Data Sheet
+Download MSDS

A factory prepared blend of Portland cement, lime, graded silica aggregates
and chemical modifiers for the easy installation of glass block.
+Download Data Sheet
+Download MSDS

Use as a professional grade bond coat for setting high lug, absorptive,
semi-vitreous, vitreous ceramic tiles and natural stone for service in residential
and commercial use. It is used in a mortar bed from 3/32" to 3/16" (2.4 to
4.8 mm) after the tiles have been properly embedded.
Applicable ANSI Standards: A108.5, A108.1B, A108.12, A118.1, A118.11
+Download Data Sheet
+Download MSDS

A flexible, latex- Portland cement mortar that is composed of an integral blend
of special diverse dry polymers, plasticizers, Portland cement and sand. When
cured, each separate polymer imparts distinct characteristics which compliment
the other polymers forming a union which provides for 48% higher flexural
strength than conventional mortars, thus furnishing the ultimate in a single
component latex-Portland cement mortar.
This product is covered by a 5 Year Warranty
Applicable ANSI Standards: A108.5, A108.1B, A108.12, A118.1, A118.4, A118.11
+Download Data Sheet
+Download MSDS

A flexible, fast-setting, polymer-modified mortar that is composed of an integral
blend of special dry polymers and plasticizers for flexibility, special chemical
additives for fast-setting properties, Portland cement and sand. Pro M-Flex Strata^®
FastSet 914-FS allows the contractor to grout within two hours of setting tile so the
finished installation can be open to foot traffic in 4 - 6 hours.
This product is covered by a 5 Year Warranty
Applicable ANSI Standards: A108.5, A108.1B, A118.1, A118.4, A118.11
+Download Data Sheet
+Download MSDS

Specifically formulated to provide a single-step installation method for large
format ceramic tile and stone. It fully supports heavy tiles and stone, reducing
lippage problems and the need for leveling or pre-floating rough surfaces. Pro
Full Contact 907 can be built up to 3/4" (19 mm) without shrinkage or extended
set times.
This product is covered by a 5 Year Warranty
Applicable ANSI Standards: A108.5, A108.1B, A108.12, A118.1, A118.4, A118.11
+Download Data Sheet
+Download MSDS

A powdered latex enhanced dry-set mortar composed of Portland cement,
sand and special polymer additives. MultiCure 905 is used as a bond coat for
setting all types of ceramic tile over a variety of substrates including exterior
grade plywood (EGP). MultiCure 905 offers the economy and ease of application
of dry-set mortars while significantly improving bond strengths, freeze-thaw
stability, flexural strength and other qualities formerly available only through
the use of liquid latex additives.
This product is covered by a 5 Year Warranty
Applicable ANSI Standards: A108.5, A108.1B, A108.12, A118.1, A118.11
+Download Data Sheet
+Download MSDS

A polymer-modified, dry-set mortar formulated to hold large tile and
marble units in place on vertical surfaces. It may also be used on horizontal
surfaces. MultiCure NonSag 906 is used as a bond coat for setting absorptive,
semi-vitreous and vitreous tiles on vertical surfaces for service in residential
and commercial use. It is used for mortar bed as thin as 3/32" to 3/16"
(2.4 to 5 mm) after tiles have been twisted or embedded. MultiCure NonSag
906 has excellent water and impact resistance, is water cleanable,
non-flammable, and requires no soaking of tiles.
Applicable ANSI Standards: A108.5, A108.1B, A108.12, A118.1, A118.11
+Download Data Sheet
+Download MSDS

The economical polymer-modified dry-set mortar designed for the bonding
of all types of tiles. It may be used for either walls or floors for both interior
and exterior applications where a liquid latex-modified mortar is recommended.
MultiSet 917 is a blend of Portland cement, sand and special dry latex additives
that significantly improve bond strength and freeze-thaw stability — performance
characteristics typically available only through the addition of liquid latex
additives to dry-set mortar.
Applicable ANSI Standards: A108.5, A108.1B, A118.1, A118.4
+Download Data Sheet
+Download MSDS

A dual purpose — floor and wall — premium dry-set mortar. It features
high bond strengths, extended open time, creamy consistency and additional
coverage over standard dry-set mortars. Best used for cost effective interior
and exterior applications. It is particularly suited for tile installations in hot
and dry parts of the country.
This product is covered by a 5 Year Warranty
Applicable ANSI Standards: A108.5, A108.1B, A118.1
+Download Data Sheet
+Download MSDS

A factory blend of Portland cement, sand and special chemical additives
which produce an excellent, fast setting, dry-set mortar. PermaBond
FastSet 904 enables the contractor to set tile and grout within two hours
so that he will have a finished installation which can be open to foot
traffic in 4 hours.
Applicable ANSI Standards: A108.5, A108.1B, A118.1, A118.4
+Download Data Sheet
+Download MSDS
+Download MSDS

A dry-set mortar composed of Portland cement, sand and special chemical
additives. It is used as a bond coat for setting marble, granite and other
larger unit ceramic tiles over a variety of substrates.
Applicable ANSI Standards: A118.1
+Download Data Sheet
+Download MSDS

A special blend of Portland cement, sand and special chemical additives
which produce a dry-set mortar with a long open time for the installation
of various tiles on vertical surfaces. PermaBond's non-sag properties limit
lippage.
Applicable ANSI Standards: A108.5, A108.1B, A118.1, A118.4
+Download Data Sheet
+Download MSDS

A polymer-modified dry-set mortar designed to be used as a fast setting
bond coat for the installation of all types of tile over a variety of substrates.
This product is covered by a 5 Year Warranty
Applicable ANSI Standards: A108.5, A108.1B, A108.12, A118.1, A118.4, A118.11
+Download Data Sheet
+Download MSDS

A factory blend of Portland cement, sand and a unique blend of special
additives. C-Cure ThinSet 911 produces an excellent bond with greater
coverage than conventional dry-set mortars for the installation of ceramic tile.
Applicable ANSI Standards: A108.5, A108.1B, A118.1
+Download Data Sheet
+Download MSDS

An economical factory-blend of Portland cement, extenders and additives.
TileSet produces an excellent bond by use of the dry-set mortar method for
the installation of ceramic tile.
Applicable ANSI Standards: A108.5, A108.1B, A118.1, A118.4
+Download Data Sheet
+Download MSDS
+Download MSDS

A technological breakthrough in the development of a truly elastomeric dry-set
mortar for the installation of ceramic tile and dimension stone. UniFlex is
composed of a unique synergism of latex polymers and Portland cement.
UniFlex may also be used as an elastomeric anti-fracture membrane for the
installation of ceramic tile, marble, slate and granite over a variety of surfaces.
This product is covered by a 5 Year Warranty and a 10 Year Warranty.
Applicable ANSI Standards: A118.11
+Download Data Sheet
+Download MSDS
+Download MSDS
+Download MSDS

A blend of Portland cement, fine sand and special additives which produce an
excellent dry-set mortar for the installation of high absorption wall tiles
(greater than 7%).
Applicable ANSI Standards: A108.5, A108.1B, A118.1
+Download Data Sheet
+Download MSDS