MULTI-PURPOSE DRY-SET MORTARS

Formulated for superior flexibility and bond strength for the most demanding
tile installation requirements. CPM-Flex Pro 920 uses a blend of polymers and
inorganic chemicals to increase the contact between the mortar and tile for excellent
bonds on a wide variety of new and remodeling substrates. Extended open and adjustment
times and a creamy consistency provide excellent handling characteristics. It offers up to 20%
more coverage than other thin-sets. Isolates cracks up to 1/8" (3.2 mm).
This product is covered by a 5 Year Warranty
Exceeds ANSI A118.4 and A118.11 without the need for additives.
+Download Data Sheet
+Download MSDS

Offers high flexibility and bond strength for a wide variety of floor and wall
tile installations.Excellent for setting large format tile or stone, PRO M-LITE 929
will not sag or slip on walls and offers non-slump performance for floor installations.
PRO M-LITE 929 is 40% lighter than traditional mortars, providing excellent handling
characteristics. A 30 lb. (13.6 kg) bag covers the same area as a 50 lb. (22.7 kg) bag
of traditional mortar. Formulated with recycled material – contributes to LEED certification.
This product is covered by a 10 Year Warranty
Applicable ANSI Standards: A118.4 and A118.11
+Download Data Sheet
+Download MSDS

Use as a professional grade bond coat for setting high lug, absorptive,
semi-vitreous, vitreous ceramic tiles and natural stone for service in residential
and commercial use. It is used in a mortar bed from 3/32" to 3/16"
(2.4 to 4.8 mm) after the tiles have been properly embedded.
Applicable ANSI Standards: A108.5, A108.1B, A108.12, A118.1, A118.11
+Download Data Sheet
+Download MSDS

A flexible, latex- Portland cement mortar that is composed of an integral blend
of special diverse dry polymers, plasticizers, Portland cement and sand. When
cured, each separate polymer imparts distinct characteristics which compliment
the other polymers forming a union which provides for 48% higher flexural
strength than conventional mortars, thus furnishing the ultimate in a single
component latex-Portland cement mortar.
This product is covered by a 5 Year Warranty
Applicable ANSI Standards: A108.5, A108.1B, A108.12, A118.1, A118.4, A118.11
+Download Data Sheet
+Download MSDS

A flexible, fast-setting, polymer-modified mortar that is composed of an integral
blend of special dry polymers and plasticizers for flexibility, special chemical
additives for fast-setting properties, Portland cement and sand. Pro M-Flex Strata^®
FastSet 914-FS allows the contractor to grout within two hours of setting tile so the
finished installation can be open to foot traffic in 4 - 6 hours.
This product is covered by a 5 Year Warranty
Applicable ANSI Standards: A108.5, A108.1B, A118.1, A118.4, A118.11
+Download Data Sheet
+Download MSDS

Specifically formulated to provide a single-step installation method for large format
ceramic tile and stone. It fully supports heavy tiles and stone, reducing lippage
problems and the need for leveling or pre-floating rough surfaces. Pro Full Contact 907
can be built up to 3/4" (19 mm) without shrinkage or extended set times.
This product is covered by a 5 Year Warranty
Applicable ANSI Standards: A108.5, A108.1B, A108.12, A118.1, A118.4, A118.11
+Download Data Sheet
+Download MSDS

A polymer-modified, dry-set mortar formulated to hold large tile and marble units
in place on vertical surfaces. It may also be used on horizontal surfaces. MultiCure
NonSag 906 is used as a bond coat for setting absorptive, semi-vitreous and vitreous
tiles on vertical surfaces for service in residential and commercial use. It is used for
mortar bed as thin as 3/32" to 3/16" (2.4 to 5 mm) after tiles have been twisted or
embedded. MultiCure NonSag 906 has excellent water and impact resistance, is water
cleanable, non-flammable, and requires no soaking of tiles.
Applicable ANSI Standards: A108.5, A108.1B, A108.12, A118.1, A118.11
+Download Data Sheet
+Download MSDS

A technological breakthrough in the development of a truly elastomeric dry-set
mortar for the installation of ceramic tile and dimension stone. UniFlex is composed
of a unique synergism of latex polymers and Portland cement. UniFlex may also be
used as an elastomeric anti-fracture membrane for the installation of ceramic tile,
marble, slate and granite over a variety of surfaces.
This product is covered by a 5 Year Warranty and a 10 Year Warranty.
Applicable ANSI Standards: A118.11
+Download Data Sheet
+Download MSDS
+Download MSDS
+Download MSDS