SURFACE PREPARATION

A glass-mesh, cement backerboard designed for use as an interior or
exterior substrate for ceramic tile, slate, thin-brick veneers, stucco, E.I.F.S.
or other similar surface systems.
Applicable ANSI Standards: A108.11, A108.8
+Download Data Sheet
+Download MSDS

A ready-mixed, organic, trowel applied anti-fracture membrane and adhesive
developed to install ceramic tile and stone over a variety of substrates.
Applicable ANSI Standards: A108.4, A136.1
+Download Data Sheet
+Download MSDS

A non-sanded (Portland cement) compound for the skim coating, leveling
and patching of floors prior to the installation of resilient flooring, carpet,
ceramic tile, slate, granite or marble. It features the performance
characteristics of a patching material that can produce a fine featheredge
finish.
This product is covered by a 5 Year Warranty
+Download Data Sheet
+Download MSDS

A self-curing, liquid latex-Portland cement-based floor leveling system for
leveling most types of floors prior to installation of resilient floor coverings,
carpet and ceramic tile. A development of our own research laboratory, Latex
Underlayment represents a major improvement in a cementitious leveling
material. Designed for pours from featheredge to 3/8" (9.5 mm) thickness.
This product is covered by a 5 Year Warranty
+Download Data Sheet
+Download MSDS

A self-curing, liquid latex-Portland cement-based floor leveling system for
leveling most types of floors prior to installation of resilient floor coverings,
carpet and ceramic tile. A development of our own research laboratory,
Latex Underlayment represents a major improvement in a cementitious
leveling material. Designed for pours from 1/8" to 1 1/2" (3 to 38 mm)
thickness.
This product is covered by a 5 Year Warranty
+Download Data Sheet
+Download MSDS
+Download MSDS

The state-of-the-art in Portland cement technology. With the sole addition
of water, it becomes a free flowing liquid mortar that seeks its own level and
produces a smooth flat surface. LevelCure LCB 951 has been designed as an
underlayment for the fast leveling and smoothing of floor surfaces with a
minimum of labor required. The resulting finish is a smooth and durable
surface that is acceptable for the installation of all floor coverings.
This product is covered by a 5 Year Warranty and a 10 Year Warranty
+Download Data Sheet
+Download MSDS
+Download Tech Bulletin

A high quality emulsion polymer for self-leveling underlayments. A bonding
agent and fortifying admixture, LevelCure Primer 943 reduces water absorption
associated with concrete to ensure a flowable mix.
This product is covered by a 10 Year Warranty.
+Download Data Sheet
+Download MSDS

The state-of-the-art in Portland cement technology. With the sole addition of
water, it becomes a free flowing liquid mortar that seeks its own level and
produces a smooth flat surface. LevelCure SLU 961 has been designed as an
underlayment for the fast leveling and smoothing of floor surfaces with a
minimum of labor required. The resulting finish is a smooth and durable
surface that is acceptable for the installation of all floor coverings.
This product is covered by a 5 Year Warranty
+Download Data Sheet
+Download MSDS

A non-sanded, Portland cement compound for the skim coating and finishing
of interior or exterior subfloors prior to the installation of resilient flooring such
as vinyl and VCT, carpet, ceramic tile, slate, granite or marble.
This product is covered by a 5 Year Warranty
+Download Data Sheet
+Download MSDS

A self-furred plastic lath designed to mechanically attach and reinforce C-Cure
mortar bed and self-leveling systems over properly prepared exterior grade
plywood substrates. ProLath 950 cuts easily with a standard utility knife and is
self-furred on both sides.
This product is covered by a 5 Year Warranty and a 10 Year Warranty.
+Download Data Sheet
+Download Tech Bulletin

The new formula dries 30% faster and is easier to spread than the old Pro-Red.
A ready-to-use, elastomeric, waterproofing and anti-fracture membrane for
all interior or exterior commercial and residential tile and stone installations.
Easily applied with roller, trowel or sprayer producing a continuous moisture
barrier with outstanding adhesion. Reduces crack transmission in ceramic tile
or stone floors.
This product is covered by a 5 Year Warranty and a 10 Year Warranty.
Applicable ANSI Standards: A118.10, A108.13, A118.10, A118.12
+Download Data Sheet
+Download MSDS
+Download Tech Bulletin
+Download Tech Bulletin
+Download Tech Bulletin

A blend of Portland cement, graded silica aggregates and chemical modifiers
which, when applied over metal lath and allowed to cure, provides a thin, stable
mortar bed substrate to receive setting material for ceramic tile.
+Download Data Sheet
+Download MSDS

A cementitious based elastomeric anti-fracture waterproofing membrane modified
with an acrylic polymer that will produce a tile setting adhesive specially developed
for the installation of all types of tile, marble and stone over a variety of surfaces.
UltraCure 971 is trowel applied to develop a continuous positive moisture barrier
with excellent adhesion to wood, dry concrete slabs, steel, plastic laminate
countertops, concrete block and cementitious backer units.
This product is covered by a 5 Year Warranty and a 10 Year Warranty.
Applicable ANSI Standards: A108.13, A118.10
+Download Data Sheet
+Download MSDS
+Download MSDS
+Download MSDS
+Download MSDS
+Download Technical Bulletin
+Download Tech Bulletin

A dry polymer-modified, self-curing, Portland cement-based floor leveling
system for most types of floors prior to the installation of resilient flooring,
carpet, ceramic tile, slate, granite or marble. This product eliminates the use
of special liquid latex additives. Water is all that is required for mixing.
UniLayment 966 develops a dense, water resistant surface and contains
special organic and inorganic chemicals which, when properly mixed (water only),
will featheredge to a non-checking, non-cracking durable surface.
This product is covered by a 5 Year Warranty
+Download Data Sheet
+Download MSDS

A fast-curing, latex-modified, Portland cement-based
leveling and patching compound for floors prior to the installation of resilient
flooring, carpet, ceramic tile, slate, granite or marble. For general applications,
UniLayment FastSet 969 requires only water to develop a dense, waterresistant
surface.
This product is covered by a 5 Year Warranty
+Download Data Sheet
+Download MSDS
+Download MSDS

A lightweight Portland cement and sand-based browncoat that is specifically
designed as a plaster substrate for ceramic tile. WallMud 952 may be used with
or without metal lath over approved surfaces as outlined in the directions. This
material allows the applicator to do the complete installation in the shortest
possible amount of time.
Applicable ANSI Standards: A108.1A
+Download Data Sheet
+Download MSDS